The best commode is the one that matches your drain layout, fits your bathroom size, flushes cleanly with less water and is easy to keep hygienic. To choose it, check your P-trap or S-trap outlet first, then compare a one piece toilet with a wall hanging commode, look for a rimless bowl with a dual flush system, confirm the load rating, pick a well-fitting commode seat, and compare the commode price along with warranty and installation support.
Key takeaways
- Always confirm the trap type of commode (P-trap commode or S-trap commode) before you shop. It decides which western toilet commode will physically fit.
- A one piece toilet is easy to clean and looks seamless. A wall mounted commode saves floor space and makes mopping easier.
- A rimless bowl with a dual flush system helps with cleaning and water use.
- Ask for a stated load rating and a clear warranty rather than relying on general claims.
Why Trust This Guide?
This guide comes from the bathroom and sanitary ware content team at Lorazzo, a kitchen and bathroom brand in India. It is built around the questions homeowners, renovators and builders ask most often when buying a western toilet: Will it fit my drain? Is it easy to clean? How much does it cost to own? Product facts in this article reflect what Lorazzo lists for its own commodes. For anything specific to your home, such as pipe positions or a concealed frame, confirm with a qualified plumber before you buy.
Secret 1: Match the Trap Type and Rough-In Before Anything Else
Measure where your drain outlet sits. An S-trap commode sends waste out through the floor, while a P-trap commode sends it out through the wall. Buying the wrong one is the most common and most expensive mistake.
- S-trap: the outlet goes down into the floor. Common in many older Indian homes.
- P-trap: the outlet goes straight into the wall. Common in newer apartments and modern construction.
- Rough-in: this is the distance from the finished wall to the centre of the drain outlet. Measure it in millimetres and confirm it against the product specification before you order.
If you are renovating and moving the drain, ask your plumber which layout your pipework allows.
Secret 2: Choose the Right Design: One Piece, Two Piece or Wall Hung
A one piece toilet suits most buyers who want easy cleaning. A wall hung commode suits those who want a modern look and a floor that is simple to mop. A two-piece model is the traditional option.
|
Type |
Best for |
Main advantage |
Things to check |
|---|---|---|---|
|
One piece toilet |
Most homes, easy upkeep |
Seamless body with no gap between tank and bowl for dirt to collect |
Needs a clean floor-mounted drain layout |
|
Wall hanging commode (also called wall hung commode or wall mounted commode) |
Small bathrooms, modern design |
Frees floor space, easy to mop under |
Needs a concealed cistern and a certified frame in the wall; check whether the cistern is included in the listing |
|
Two-piece toilet |
Replacements, tighter budgets |
Familiar and widely serviceable |
Joint between tank and bowl needs regular cleaning |
If you are considering a wall mounted commode with flush tank, confirm what the listing includes: the bowl, the concealed cistern, the frame and the flush plate are often separate items.
Secret 3: Look at the Flush System and Bowl Design
Choose a rimless bowl with a dual flush mechanism. A rimless bowl has no hidden under-rim ledge where grime can build up, so it is easier to clean and generally considered more hygienic.
- Rimless: open rim design that removes the hard-to-reach ledge.
- Dual flush: a smaller flush for liquid waste and a larger one for solid waste, which helps reduce water use.
- Powerful, quiet flush: check the product description for the flushing method rather than assuming.
Secret 4: Check Build Quality and the Stated Load Rating
Look for a smooth, even glaze on ceramic surfaces, a stated load rating and a clear warranty. A good commode should feel solid, not hollow or uneven.
- Glaze: a smooth glaze resists stains and is easier to wipe clean.
- Load rating: Lorazzo one piece commodes are load-tested to 450 kg, and wall-hung models support up to 450 kg on a certified concealed frame.
- Standards: ask the seller whether the product conforms to the relevant BIS standard for ceramic sanitary ware (IS 2556) and request the documentation.
Secret 5: Do Not Overlook the Commode Seat
The right and best commode seat should match the bowl shape and close quietly. A poor fit leads to wobbling, hinge wear and hygiene problems.
- Fit: match the seat to the bowl shape (oval or round) and hinge spacing, or buy the seat designed for that model.
- Soft-close hinges: reduce noise and protect the bowl from slamming.
- Easy-clean material: choose a seat with a smooth, non-porous finish.
- Replacement: if you only need a new toilet seat, check the dimensions of your existing bowl first. Note that an english toilet seat and a western toilet seat are commonly used interchangeably in India, so confirm shape and hinge spacing rather than the name.
Secret 6: Size It for Your Bathroom
Measure your bathroom first. Leave comfortable clearance on both sides of the bowl and in front of it, so the western toilet is practical to use and easy to clean.
- Commonly recommended clearances are about 15 inches (roughly 38 cm) from the centre of the bowl to the nearest side wall and around 21 inches (roughly 53 cm) of free space in front.
- In compact bathrooms, a wall hanging commode can make the room feel larger because the floor stays visible.
- Check the projection (how far the bowl extends from the wall) before ordering.
Secret 7: Compare Commode Price Against the Full Cost of Ownership
The lowest commode price is not always the cheapest choice. Count installation, a concealed cistern if needed, the commode seat, accessories, warranty and after-sales support.
- Check what is included: bowl, seat, cistern, frame, flush plate, fittings.
- Ask about warranty and service: a clear, written warranty matters more than a headline discount.
- Think about installation: wall-hung models need a trained installer.
-
Compare listings fairly: when you compare toilet seat price, western toilet seat price or full commode price, make sure you are comparing the same inclusions.
Secret 8: Measure the 9 Inch Distance from Wall to Commode First
For most floor-mounted S-trap commodes, the centre of the waste outlet should sit about 9 inches (approx. 225 mm) from the finished wall.
This rough-in distance is the most common reason a new commode doesn’t fit.
How to measure:
- Measure from the finished wall (after tiling) to the centre of the floor drain hole.
- Compare it with the 9 inch requirement in the commode’s spec sheet.
- If your hole is at a different distance, look for an adjustable rough-in commode or a model built for that measurement.
Pro tip: Measure after tiling, not before. Tile and adhesive add thickness and can throw off the distance.
Frequently Asked Questions
What is the best commode for a small bathroom?
A wall mounted commode is often a good fit for a small bathroom because it frees floor space and makes cleaning easier. It does need a concealed cistern and a certified frame, so confirm your wall can accommodate it.
What is the difference between a P-trap and an S-trap commode?
An S-trap commode drains through the floor, while a P-trap commode drains through the wall. Check your existing drain outlet before buying.
What is a rimless commode, and is it more hygienic?
A rimless commode has no under-rim ledge where dirt and bacteria can collect. That makes the bowl easier to wipe and clean, which is why it is generally considered more hygienic than a traditional rim design.
Do wall hung commodes need a concealed cistern?
Yes. A wall hung commode is normally paired with a concealed cistern inside the wall or a frame. Check the product listing to see whether the cistern is included or sold separately.
What is a one piece toilet?
A one piece toilet has the tank and bowl moulded together as a single unit. The seamless design means fewer joints and crevices to clean.
How much weight can a commode hold?
Lorazzo one piece commodes are load-tested to 450 kg, and wall-hung models support up to 450 kg on a certified concealed frame.
How do I measure rough-in for a commode?
Measure from the finished wall to the centre of the drain outlet in millimetres, and match it to the product specification. If unsure, ask your plumber to confirm.
Can I install a commode if my wall distance isn’t 9 inches?
Yes, but choose a model designed for that rough-in distance, or consult a plumber about an adjustable connector.
Final Checklist Before You Buy
- Confirm your drain: P-trap or S-trap.
- Choose a design: one piece toilet, wall hanging commode or two-piece.
- Prefer a rimless, dual flush model.
- Check the glaze, load rating and warranty.
- Pick a well-fitting commode seat.
- Measure clearances and projection.
- Compare total cost, not only the headline commode price.
- Measured the 9 inch wall-to-commode distance after tiling
Explore Lorazzo's commode collection to compare western toilet options for your bathroom.